Conditions: aspartimide formation · liraglutide · minus 80 °C.
This is one of those things that everyone repeats and nobody derives.
This matters practically, not just academically, because it changes what I would do next.
What is the causal chain, and where does it stop being established?
At minus 80 °C it can show up as either, and which one depends entirely on whether the product still elutes under the main peak. Purity is a ratio of areas, so a degradant only costs purity if the method resolves it. Content is a mass against a standard, so a degradant costs content whenever the parent is consumed — resolved or not. A cyclic imide at Asp, eighteen daltons lighter, which then reopens to a mixture including the iso-aspartyl form — same formula as the parent, different molecule, and invisible to a mass-only method. That is why the two measurements are not interchangeable and why an unchanged purity figure after an excursion to minus 80 °C is weak evidence: the method may simply be integrating the degradant along with the parent and reporting the sum as one peak.
The relevant point is that a mass shift of plus one dalton is deamidation and plus sixteen is oxidation, so degradation is often visible in a mass spectrum if anyone looks.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
| State | Condition | Usable window | Basis |
|---|---|---|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Hydrolysis cleaves the backbone, most readily at aspartate-proline and aspartate-glycine sequences, and is acid-catalysed. In a dry solid it barely proceeds at all.
Sequence determines which pathways apply, so general statements are general.
A mass spectrum names the pathway. Plus one, plus sixteen, minus eighteen.
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsThe honest answer is that most reported "degradation" is adsorption and dilution error rather than chemistry.
Adsorption onto glass and plastic is significant at low concentrations — micrograms per millilitre — and negligible at milligrams per millilitre. It is the usual explanation for an apparent loss in a dilute preparation.
More usefully, freeze-thaw cycling drives aggregation through concentration at the ice interface and pH shifts as buffer components crystallise out at different rates. Each cycle costs something.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
Sequence decides which pathways are even available. Check the residues.
Asparagine and glutamine are the deamidation risk, and methionine is the oxidation risk.
Aggregation is physical: peptides unfold at air-liquid interfaces and associate. Shaking maximises that interface, which is why swirling and shaking produce visibly different outcomes on the same vial.
Light exposure matters for tryptophan-containing sequences and for anything with a chromophore. Amber vials and a closed box are free mitigations.
Adsorption losses at low concentrations are quantified in formulation studies and are the reason carrier proteins are used in dilute preparations.
Swirl, never shake. Aggregation is a handling problem more than a time problem.
Mechanically, aggregation is a physical process and is the one most often caused by handling rather than by time.
A mass spectrum resolves most of this: minus eighteen is dehydration or succinimide, plus one is deamidation, plus sixteen is oxidation, and an unchanged mass with a shifted retention time is an isomer.
Apparent loss in a dilute preparation is usually adsorption rather than degradation and is worth ruling out first.
At dilute concentrations, suspect adsorption before you suspect chemistry.
Answering this needs the physical state, since a dry powder is protected from most of these and a solution is protected from none.
Deamidation converts asparagine or glutamine to the corresponding acid via a succinimide intermediate, adding one dalton. It is base-catalysed, accelerates above neutral pH and is the dominant aqueous pathway for many peptides.
Deamidation via the succinimide intermediate is well characterised, with sequence-dependent rates highest for asparagine-glycine motifs.
Nothing here is medical advice, and research-use compounds are not approved for human use.
Cold, dry, dark, still. Those four words cover most of the mitigation.
edited 8 May 2025 by kwn_analytical — added a caveat about sampling
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.