How do I reconcile 97.9% from VendorInvestigate with 99.4% from the supplier?

Conditions: 97.9% · VendorInvestigate · 99.4%.

I have two candidate explanations and no way to distinguish them.

The same procedure has worked without incident several times previously, which argues against technique.

Is this recoverable, and how would I tell?

The honest answer is that the achievable range of plausible purity figures for a given vial is wider than most people expect.

The fraction of your main peak that is actually your target versus isomers, fragments or related sequences is invisible without complementary identity testing.

Mass shifts and what they usually mean

Detection wavelength matters because 214 nm sees the peptide backbone while 280 nm sees only aromatic side chains — so truncation impurities lacking a tryptophan are invisible at 280 nm.

The ICH Q3A impurity thresholds and the relevant pharmacopoeial chapters all specify method validation requirements that almost no research-grade certificate claims to meet.

One qualification: achieving purity above roughly 98 per cent on a 30-residue peptide is fighting the chemistry of synthesis, not the quality of the purification.

If you are ranking vendors, specify a method and have all samples tested at the same place.

It helps to be literal here: understanding purity requires separating the chemistry from the method from the reporting convention, and the three are not independent.

Column pore size affects mass transfer — a 100 Angstrom packing on a 5 kDa peptide restricts diffusion, broadening the peak and potentially hiding small impurities in the shoulders.

Integration of the shoulder — whether you use perpendicular drop or tangent skim — determines what area gets assigned to the main peak versus the impurity table.

Proline conformer interconversion kinetics are well-characterised and the half-life is of the same order as the chromatographic peak width at room temperature.

The limitation is that single-digit micro-impurities become invisible at typical reporting thresholds, so "no impurities detected" means "none above one in two thousand."

The practical summary: ask for the chromatogram and the method, and ignore the headline number until you have both.

Gradient slope is the most powerful parameter and almost nobody mentions it, which is why two reports on the same material disagree by a point.

Buffer versus acid in the mobile phase changes the ionisation state of basic and acidic residues, shifting retention and selectivity — same vial, potentially different separation.

Tailing factor measures peak shape, and a badly tailing peak spreads into the region where small impurities live, forcing tangent-skim integration that assigns tail area to the main peak.

Inter-laboratory studies on identical peptide material routinely find half-a-per-cent to a full-per-cent spreads in reported purity on the same sample.

Worth noting that method standardisation is poor in the research-grade space compared to pharmaceutical work, so identical-looking methods can produce different results.

Compare purity within a single laboratory on the same method, never across laboratories.

Specifically, start from what the detector sees, because that tells you what the number means.

Mass on column affects detector linearity and peak overlap — overloading broadens peaks and hides neighbours, while underloading improves resolution but loses sensitivity.

Published side-by-side method comparisons show that a two-point difference in purity on the same vial is easily explained by method choice alone.

The caveat is that purity without identity is only half an answer — a high purity does not mean the peak is actually what you think it is.

If you are ranking vendors, specify a method and have all samples tested at the same place.

edited 27 Jul 2026 by Dr_Nadia_Farsi — removed a claim I could not source

More usefully, identity and purity are orthogonal, and a high purity says almost nothing about whether the peak is actually what you think it is.

Mobile phase additive choice affects ionisation and peak shape — TFA gives sharp peaks but suppresses mass spectrometry signal, formic acid gives worse peaks but preserves signal.

I would be careful about over-reading a single measurement — treat it as a data point, not as ground truth.

The practical summary: ask for the chromatogram and the method, and ignore the headline number until you have both.