Details up front: TFC · Sangon Biotech (Shanghai).
These are treated as interchangeable and I do not think they are.
If both are acceptable I would like to know that, so I can stop thinking about it.
Under what conditions does the answer flip?
The honest answer is that most claimed differences between reputable suppliers are inside inter-laboratory noise.
Submitting to different laboratories introduces a method difference that commonly exceeds the supplier difference. Gradient slope alone can move a reported purity figure by a per cent in either direction.
| Observation | Implication | How to check |
|---|---|---|
| Lot number not on the vial | Certificate cannot be tied to your material | Photograph vial and certificate together |
| No method section | The number is not reproducible | Request column, gradient, wavelength |
| Purity to two decimals, no chromatogram | False precision | Request the trace |
| Test date before manufacture date | Certificate belongs to a different lot | Compare dates |
| Identical figures across lots | One certificate reused | Compare two lots side by side |
| “Sterile filtered” with no sterility test | Process claim substituted for a result | Ask for the sterility report |
Compare documentation on a fixed checklist rather than by impression: lot specificity, method section, chromatogram availability, quantified content, water and counter-ion figures, and whether the code is on the vial.
Gradient slope, column chemistry and detection wavelength all affect the reported purity figure, which is why the method section is the part that makes results comparable.
Name the laboratory and the dates or the comparison cannot be reproduced.
HPLC purity, identity confirmation and quantified content on the vial you actually hold. Reports arrive with the chromatogram attached, not just a number.
Submit a sampleFounded 1998. ISO 9001 and cGMP certified, 1,500+ staff and 200+ patents. The synthesis house behind a great many of the vials that get sent out for testing - batch-specific documentation with every order.
Visit GL BiochemConcretely, ratings on this site are ours alone and are deliberately not reconciled with anyone else's.
Lead time and lane behaviour are supplier properties too and are easier to compare than analytical ones, because they need no laboratory at all.
To be exact about it, publish the method with the result. A comparison without the laboratory named and the submission dates given is not reproducible by anyone.
Inter-laboratory spread on identical peptide material is routinely half a per cent to a per cent by RP-HPLC, which is the noise floor for any cross-laboratory comparison.
One laboratory, one method, one submission. Otherwise it is not a comparison.
Answering this needs the axis. A supplier that is best on paperwork and a supplier that is best on price are both correct answers to different questions.
Cost per milligram of actual peptide is the honest price comparison, which means dividing by measured content rather than by label claim.
Content is the more discriminating measurement than purity for supplier comparison, because purity clusters tightly among competent suppliers and content does not.
The ratings on this site are a community opinion average on a ten-point scale and are not reconciled with any other community's figures.
Use a fixed documentation checklist rather than an impression.
A single member running three suppliers on one method is worth more than thirty members running one supplier each.
Sample size matters. One order each is an anecdote about six vials; three orders each over a year is the beginning of a comparison.
Nothing here is medical advice, and research-use compounds are not approved for human use.
Price per milligram of measured peptide, not per milligram of label claim.
edited 27 Feb 2025 by dead_volume — clarified the distinction between purity and content
This is the question where methodology matters more than the conclusion.
To compare properly: order the same compound at the same nominal strength from each supplier, submit all samples to the same laboratory in the same submission if possible, and ask for the same test set on each.
Content assay results across the published datasets vary considerably more between suppliers than purity does, which makes content the more discriminating axis.
Comparisons drawn from different laboratories at different times are weaker evidence than most people treat them as.
Compare content, not purity. Purity clusters and content does not.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.