The particulars: liraglutide · 10 mg/mL.
I would like the arithmetic checked rather than the conclusion asserted.
I have deliberately not used an online calculator because I want to be able to check the result.
Can someone show the working rather than just the answer?
10 mg/mL is 10000 µg/mL — roughly 1000 times the concentration at which surface adsorption is measurable. Losses to glass and plastic matter in the low microgram-per-millilitre range, where a monolayer on the wall is a real fraction of what is in solution. At 10 mg/mL that same monolayer is a rounding error. If you see an apparent loss at this concentration, suspect the dilution step or the assay before you suspect the wall.
Answer first: the degradation pathways worth knowing are hydrolysis, deamidation, oxidation, aggregation and adsorption, and each has a different trigger and a different mitigation.
Deamidation converts asparagine or glutamine to the corresponding acid via a succinimide intermediate, adding one dalton. It is base-catalysed, accelerates above neutral pH and is the dominant aqueous pathway for many peptides.
| Pathway | Dominant when | Detected by |
|---|---|---|
| Deamidation | Solution, neutral to alkaline pH | RP-HPLC, +1 Da on MS |
| Oxidation | Light, trace metals, peroxides | RP-HPLC, +16 Da on MS |
| Hydrolysis | Solution, extremes of pH | RP-HPLC, fragment masses |
| Aggregation | Agitation, interfaces, high concentration | SEC, visual haze; often invisible on RP-HPLC |
| Freeze-concentration damage | Freeze-thaw of buffered solution | SEC, loss of recovered content |
In practice, light exposure matters for tryptophan-containing sequences and for anything with a chromophore. Amber vials and a closed box are free mitigations.
Aggregation at air-liquid interfaces is established from surface-tension and particle-count studies and is the basis for anti-agitation handling guidance.
Sequence determines which pathways apply, so general statements are general.
Cold, dry, dark, still. Those four words cover most of the mitigation.
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsAnswering this needs the physical state, since a dry powder is protected from most of these and a solution is protected from none.
Hydrolysis cleaves the backbone, most readily at aspartate-proline and aspartate-glycine sequences, and is acid-catalysed. In a dry solid it barely proceeds at all.
Adsorption onto glass and plastic is significant at low concentrations — micrograms per millilitre — and negligible at milligrams per millilitre. It is the usual explanation for an apparent loss in a dilute preparation.
Adsorption losses at low concentrations are quantified in formulation studies and are the reason carrier proteins are used in dilute preparations.
Nothing here is medical advice, and research-use compounds are not approved for human use.
At dilute concentrations, suspect adsorption before you suspect chemistry.
The honest answer is that most reported "degradation" is adsorption and dilution error rather than chemistry.
Freeze-thaw cycling drives aggregation through concentration at the ice interface and pH shifts as buffer components crystallise out at different rates. Each cycle costs something.
A mass spectrum resolves most of this: minus eighteen is dehydration or succinimide, plus one is deamidation, plus sixteen is oxidation, and an unchanged mass with a shifted retention time is an isomer.
Deamidation via the succinimide intermediate is well characterised, with sequence-dependent rates highest for asparagine-glycine motifs.
Sequence decides which pathways are even available. Check the residues.
Start with the sequence, because which pathways are available depends on which residues are present.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
The caveat is that none of these pathways can be seen by looking at a vial, and a clear solution can be substantially degraded.
Swirl, never shake. Aggregation is a handling problem more than a time problem.
The short version: water enables most of it, oxygen enables oxidation, surfaces enable adsorption, and agitation enables aggregation.
Aggregation is physical: peptides unfold at air-liquid interfaces and associate. Shaking maximises that interface, which is why swirling and shaking produce visibly different outcomes on the same vial.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
A mass spectrum names the pathway. Plus one, plus sixteen, minus eighteen.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.