Concretely: 98.4% · liraglutide.
I want the working, not the result — I need to be able to redo it with different numbers.
I care about the precision as well as the value — I want to know how many figures are real.
How many significant figures are actually justified here?
98.4 per cent is at the top of what stepwise synthesis delivers on a chain this long, and it is reachable rather than fictional. Every coupling is high-yielding and none is quantitative, so the deletion and truncation sequences that survive purification are what occupies the remaining 1.6 per cent. Above roughly 98 per cent you are fighting the purification rather than the synthesis, which is why a 98.4 per cent figure on liraglutide deserves a method question — column, gradient, wavelength — rather than either belief or dismissal.
To be exact about it, reporting threshold is convention and not chemistry, which is why two certificates with different thresholds disagree by a tenth of a point or more.
Sample solvent strength affects peak shape — if you inject in strong solvent on a gradient starting in weak solvent, the solvent peak can distort your main peak or create a false shoulder.
| Test | Answers | Does NOT answer |
|---|---|---|
| RP-HPLC, area % | What fraction of detected material is the target | How much target is present |
| Quantified content | Milligrams of peptide per vial | What the impurities are |
| ESI-MS identity | Whether the molecular weight matches | Purity, or isomeric substitution |
| Peptide mapping | Sequence, localised to a fragment | Quantity |
| Karl Fischer | Water content of the solid | Solvent content |
| LAL endotoxin | Pyrogen load in EU/mg | Sterility |
| Sterility test | Growth in defined media over 14 days | Endotoxin, or bioburden count |
It helps to be literal here: integration of the shoulder — whether you use perpendicular drop or tangent skim — determines what area gets assigned to the main peak versus the impurity table.
Proline conformer interconversion kinetics are well-characterised and the half-life is of the same order as the chromatographic peak width at room temperature.
Compare purity within a single laboratory on the same method, never across laboratories.
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsGradient slope is the most powerful parameter and almost nobody mentions it, which is why two reports on the same material disagree by a point.
Temperature affects the dynamics of molecular conformation, and if a peptide has proline residues that interconvert on the chromatographic timescale, the peak will split or shoulder at low temperature and collapse at high temperature.
More usefully, mass on column affects detector linearity and peak overlap — overloading broadens peaks and hides neighbours, while underloading improves resolution but loses sensitivity.
The Arrhenius relationship for peptide degradation is the basis of accelerated stability testing and also governs how quickly methods drift with temperature.
If you are ranking vendors, specify a method and have all samples tested at the same place.
edited 22 Jul 2025 by e_dziedzic — added the method parameters
On the detail: the single most important distinction is between what purity measures — the fraction of detected material that is your target — and what you actually want to know — how much of the material in the vial is your target.
The fraction of your main peak that is actually your target versus isomers, fragments or related sequences is invisible without complementary identity testing.
Tailing factor measures peak shape, and a badly tailing peak spreads into the region where small impurities live, forcing tangent-skim integration that assigns tail area to the main peak.
The ICH Q3A impurity thresholds and the relevant pharmacopoeial chapters all specify method validation requirements that almost no research-grade certificate claims to meet.
The practical summary: ask for the chromatogram and the method, and ignore the headline number until you have both.
edited 22 Jul 2025 by charge_state_3 — reworded for clarity after a comment
The honest answer is that the achievable range of plausible purity figures for a given vial is wider than most people expect.
Mobile phase additive choice affects ionisation and peak shape — TFA gives sharp peaks but suppresses mass spectrometry signal, formic acid gives worse peaks but preserves signal.
Worth noting that method standardisation is poor in the research-grade space compared to pharmaceutical work, so identical-looking methods can produce different results.
If you only pay for one test, pay for quantified content. Purity is the number everyone quotes and content is the number that changes what you do.
The short answer is that two competent laboratories on identical material will disagree, and the disagreement is almost always explainable by method differences.
Gradient slope controls resolution, and gentler slopes resolve co-eluting impurities into separate peaks — so the better method reports the worse purity number.
Published side-by-side method comparisons show that a two-point difference in purity on the same vial is easily explained by method choice alone.
The limitation is that single-digit micro-impurities become invisible at typical reporting thresholds, so "no impurities detected" means "none above one in two thousand."
In practice: ask for the chromatogram, check the method section, check the lot number against the vial, and set your accept threshold before you see the result rather than after.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.