For reference: CPC · Tianjin · Poland.
The failure mode I am trying to avoid is making this decision emotionally.
I have twelve months in view and I would like the plan to survive that long.
What should I decide now, and what should I defer?
Start with the physical state, because it changes the answer completely and is the first thing to establish.
That is the argument for shipping lyophilised rather than for shipping colder. A dry powder with low residual moisture is stable at ambient for months; the pathways that matter need water.
| State | Condition | Usable window | Basis |
|---|---|---|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Put another way, asking a supplier to hold a shipment during a heatwave is reasonable and the better ones agree; the cost is a week and the benefit is a shorter warm exposure for anything in solution.
Arrhenius kinetics predict approximately a doubling of degradation rate per ten-degree rise and are the standard basis for cold-chain design.
A cold pack tells you nothing about the eleven days before the last one.
A liquefied pack is expected. It is not evidence of a problem.
edited 13 Nov 2025 by ines_brandt — added the method parameters
Aggregated, published test results and vendor ratings built from submitted batches. Methodology stated, dataset browsable, no listing fees.
Browse resultsAnswering this needs the transit duration and the ambient temperature, and then the arithmetic is straightforward.
Arrhenius behaviour means the degradation rate roughly doubles per ten degrees. A week at thirty degrees is therefore a meaningful exposure for a solution and an immaterial one for a dry solid.
More usefully, once the parcel arrives, the domestic leg is the controllable part: get it into the refrigerator promptly rather than leaving it in a warm hallway for a day.
Single-use temperature loggers are standard practice in supply chains where temperature genuinely matters and are inexpensive at parcel scale.
Reconstituted material has a genuine cold-chain requirement and it starts the moment water is added.
Solutions are a different question and deserve the worry the solids get.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.