Setup, so nobody has to ask: dimerisation · 25 °C.
The empirical answer seems settled. The explanation does not.
If the honest answer is that nobody knows, I would rather hear that than a plausible story.
What is the causal chain, and where does it stop being established?
Because temperature enters the rate constant through an exponential, so equal steps in temperature multiply the rate instead of adding to it. Arrhenius puts the rate proportional to exp(−Ea/RT); the working approximation is a doubling per 10 K, which takes 5, 15, 25 and 35 °C to multipliers of 1, 2, 4 and 8. The steps in temperature are equal and the steps in rate are not, and that is the whole of the observation. At 25 °C the same rule gives about 4 times the refrigerated rate, and another 10 K would roughly double it again. Two chains join, usually through a disulfide, so the product is roughly twice the mass and shows up as a late peak — or as nothing, if it never comes off the column. Ea differs by route, so the ranking of routes changes with temperature too — which is why accelerated data extrapolates badly and why nobody should read a 40 °C study as a fast version of a 5 °C one.
Start with the sequence, because which pathways are available depends on which residues are present.
Adsorption onto glass and plastic is significant at low concentrations — micrograms per millilitre — and negligible at milligrams per millilitre. It is the usual explanation for an apparent loss in a dilute preparation.
| State | Condition | Usable window | Basis |
|---|---|---|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Light exposure matters for tryptophan-containing sequences and for anything with a chromophore. Amber vials and a closed box are free mitigations.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
Swirl, never shake. Aggregation is a handling problem more than a time problem.
Analytical standards and reagents with traceable certificates. Every quantitative result you read inherits the accuracy of the standard behind it.
Shop standardsThe short version: water enables most of it, oxygen enables oxidation, surfaces enable adsorption, and agitation enables aggregation.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
A mass spectrum resolves most of this: minus eighteen is dehydration or succinimide, plus one is deamidation, plus sixteen is oxidation, and an unchanged mass with a shifted retention time is an isomer.
Nothing here is medical advice, and research-use compounds are not approved for human use.
At dilute concentrations, suspect adsorption before you suspect chemistry.
Answering this needs the physical state, since a dry powder is protected from most of these and a solution is protected from none.
Aggregation is physical: peptides unfold at air-liquid interfaces and associate. Shaking maximises that interface, which is why swirling and shaking produce visibly different outcomes on the same vial.
It helps to be literal here: deamidation converts asparagine or glutamine to the corresponding acid via a succinimide intermediate, adding one dalton. It is base-catalysed, accelerates above neutral pH and is the dominant aqueous pathway for many peptides.
Adsorption losses at low concentrations are quantified in formulation studies and are the reason carrier proteins are used in dilute preparations.
Apparent loss in a dilute preparation is usually adsorption rather than degradation and is worth ruling out first.
A mass spectrum names the pathway. Plus one, plus sixteen, minus eighteen.
The relevant point is that a mass shift of plus one dalton is deamidation and plus sixteen is oxidation, so degradation is often visible in a mass spectrum if anyone looks.
Freeze-thaw cycling drives aggregation through concentration at the ice interface and pH shifts as buffer components crystallise out at different rates. Each cycle costs something.
Aggregation at air-liquid interfaces is established from surface-tension and particle-count studies and is the basis for anti-agitation handling guidance.
The caveat is that none of these pathways can be seen by looking at a vial, and a clear solution can be substantially degraded.
Sequence decides which pathways are even available. Check the residues.
Asparagine and glutamine are the deamidation risk, and methionine is the oxidation risk.
Hydrolysis cleaves the backbone, most readily at aspartate-proline and aspartate-glycine sequences, and is acid-catalysed. In a dry solid it barely proceeds at all.
Deamidation via the succinimide intermediate is well characterised, with sequence-dependent rates highest for asparagine-glycine motifs.
Sequence determines which pathways apply, so general statements are general.
Cold, dry, dark, still. Those four words cover most of the mitigation.
Ask PeptideStack is a static archive. Posting is closed, but the norms are worth stating: answer the question that was asked, show your working, cite the trial or the certificate, and say plainly where the evidence runs out.