Accepted answer
At 40 °C the question is which route is fastest, not whether dimerisation happens — and the routes do not share an activation energy, so their ranking changes with temperature. 40 °C is 35 kelvin above the 5 °C middle of a 2–8 °C refrigerator. The ten-degree rule of thumb — degradation rate roughly doubling per 10 K — makes that about 11 times the refrigerated rate, which is an order-of-magnitude statement and not a shelf life. That multiplier is an average over every route at once, which is exactly why it cannot tell you which one wins. Two chains join, usually through a disulfide, so the product is roughly twice the mass and shows up as a late peak — or as nothing, if it never comes off the column. So the way to answer it for your vial is to pick the method that sees dimerisation specifically and run it against a control held cold, rather than to infer a mechanism from a purity number that averages all of them.
The short version: water enables most of it, oxygen enables oxidation, surfaces enable adsorption, and agitation enables aggregation.
Oxidation targets methionine, cysteine and tryptophan, adding sixteen daltons per oxygen. It is catalysed by trace metals and promoted by dissolved oxygen and by light.
Reported and extrapolated stability by condition
| State | Condition | Usable window | Basis |
|---|
| Lyophilised solid | −20 °C, sealed, dry | 24–36 months | Supplier guidance |
| Lyophilised solid | 2–8 °C, sealed | 12–24 months | Supplier guidance |
| Lyophilised solid | 25 °C, sealed | 4–8 weeks | Extrapolated (Arrhenius) |
| Lyophilised solid | 40 °C, sealed | 1–2 weeks | Extrapolated |
| Solution, preserved | 2–8 °C | 28 days | USP microbiological convention |
| Solution, preserved | 25 °C | 3–7 days | Extrapolated |
| Solution, unpreserved | 2–8 °C | 24 hours | USP microbiological convention |
Windows for the solid state are chemical; windows for solution are microbiological and usually shorter than the chemical limit.
Put another way, freeze-thaw cycling drives aggregation through concentration at the ice interface and pH shifts as buffer components crystallise out at different rates. Each cycle costs something.
Metal-catalysed oxidation of methionine is documented across peptide and protein formulations and is why chelators appear in some formulations.
Sequence decides which pathways are even available. Check the residues.
The desiccant point is under-appreciated and costs nothing to act on. – coldpack_88 9 months ago add a comment